Nine Elms to Pimlico bridge
Contents |
[edit] Introduction
The London Borough of Wandsworth promoted an international, multi-disciplined competition for the design of a pedestrian and cycle bridge across the Thames which will link Nine Elms on the south bank to Pimlico on the north. The proposed budget is £40m, of which some £26m has already been raised.
The public was involved in the selection process and a jury panel established, chaired by Graham Stirk of Rogers, Stirk Harbour and Partners (RSHP).
[edit] Brief
The bridge is required to be 150 m open span (minimum) and 10.96 m height (minimum) above ordinance datum so as not to impact on river traffic.
Several options are being considered for the location of the bridge and the final location will not be agreed until Stage 2 of the competition.
The brief requires that design proposals consider:
- Inspiration.
- Elegance.
- Function.
- Safety both for cyclists and pedestrian traffic.
- Accessibility for all.
- Cost effectiveness in construction and future maintenance.
- A sense of place at both approaches to the bridge.
[edit] Stage 1 concepts
Stage 1 of the competition asked for two A2 size boards to be submitted by mid-February 2015.
Board 1 was to be a mixture of words, diagrams and sketches showing:
- Integration of cycle and pedestrian traffic provisions.
- Height and spans across the river.
- Location of the landing points.
- Construction methodology to minimise impact on river traffic.
Board 2 was to be a single image without words showing what the bridge will look like from the river or shoreline.
74 schemes were submitted. Have a look at the entries by clicking on the image below.
The four shortlisted schemes invited to take part in the next stage of the competition were:
- Buro Happold Ltd with Marks Barfield Architects, J&L Gibbons Landscape Architects, Gardiner and Theobald.
- Bystrup Architecture Design and Engineering with Robin Snell & Partners, Sven Ole Hansen ApS, Aarsleff and ÅF Lighting.
- Ove Arup & Partners Ltd with AL_A, Gross Max, Equals Consulting and Movement Strategies.
- Ove Arup & Partners Ltd with Hopkins Architects and Grant Associates.
Click on the image below to see the shortlisted entries.
[edit] Winner
In November 2015, it was announced that the scheme by team 025 had won the competition: Bystrup Architecture Design and Engineering with Robin Snell & Partners, Sven Ole Hansen ApS, Aarsleff and ÅF Lighting.
Erik Bystrup said, "From the outset we wanted to design an elegant bridge that provided simple and uninhibited access for all, with minimal impact landings on each bank... We are very excited that this will be the first shared pedestrian and cycle bridge over the Thames, adding to the rich history of London's river crossings".
[edit] Criticism
In December 2015, The GMB union called on TFL to scrap plans for the bridge, which is expected to cost £40 million, some of which will be publicly funded. GMB pointed out that the proposed location for the bridge is only 350 yards from the existing Vauxhall bridge and suggested that there were more important priorities for public money.
[edit] Location
In October 2018, the plans moved forward as Wandsworth council revealed three shortlisted locations:
- Pimlico Gardens on the north bank to Bourne Valley Wharf on the south bank.
- Dolphin Square to Prescot Wharf.
- Claverton Street to Kirtling Street.
A location appraisal report exploring the pros and cons of each landing spot was unable to identify a single location that ‘delivers benefits without significant challenges’. It added, ‘the eventual selection will be about balancing the benefits against any harms that may arise.’
Public exhibitions are to be held in early-November 2018 as part of the consultation to find the best location ahead of a final recommendation to Wandsworth in 2019.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
Tackle the decline in Welsh electrical apprenticeships
ECA calls on political parties 100 days to the Senedd elections.
Resident engagement as the key to successful retrofits
Retrofit is about people, not just buildings, from early starts to beyond handover.
What they are, how they work and why they are popular in many countries.
Plastic, recycling and its symbol
Student competition winning, M.C.Esher inspired Möbius strip design symbolising continuity within a finite entity.
Do you take the lead in a circular construction economy?
Help us develop and expand this wiki as a resource for academia and industry alike.
Warm Homes Plan Workforce Taskforce
Risks of undermining UK’s energy transition due to lack of electrotechnical industry representation, says ECA.
Cost Optimal Domestic Electrification CODE
Modelling retrofits only on costs that directly impact the consumer: upfront cost of equipment, energy costs and maintenance costs.
The Warm Homes Plan details released
What's new and what is not, with industry reactions.
Could AI and VR cause an increase the value of heritage?
The Orange book: 2026 Amendment 4 to BS 7671:2018
ECA welcomes IET and BSI content sign off.
How neural technologies could transform the design future
Enhancing legacy parametric engines, offering novel ways to explore solutions and generate geometry.
Key AI related terms to be aware of
With explanations from the UK government and other bodies.
From QS to further education teacher
Applying real world skills with the next generation.
A guide on how children can use LEGO to mirror real engineering processes.
Data infrastructure for next-generation materials science
Research Data Express to automate data processing and create AI-ready datasets for materials research.
Wired for the Future with ECA; powering skills and progress
ECA South Wales Business Day 2025, a day to remember.
AI for the conservation professional
A level of sophistication previously reserved for science fiction.


























